homeassistant

16642 readers

252 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

HA-friendly printer that won't take us to the cleaners? (lemmy.world)

submitted 4 days ago by early_riser@lemmy.world to c/homeassistant@lemmy.world

12 comments fedilink hide all child comments

At my insistence we bought a Canon laser all in one printer in 2022. It's turning out to be more trouble than it's worth, and it can't do some stuff that some family members need, like printing on thick card stock.

I do, however, like the fact that the Canon reports toner levels to HA. Is there a normie inkjet printer that also has this functionality and won't fleece us with BS ink subscriptions and lock us into using their ink?

I'd also like it to be JUST a printer, not an all-in-one. I'm looking at a dedicated scanner, which doesn't need an HA integration.

top 12 comments

sorted by: hot top controversial new old

[–] pro_user@lemmy.world 4 points 3 days ago

While it won’t offer all the bells and whistles that a vendor-specific integration has, the Internet Printing Protocol (IPP) integration is a nice generic integration that reports status and ink/toner levels of network enabled printers that support IPP. Its a very generic protocol, so I believe most network printers will work fine with that. That might help broaden your search a bit (our 2014 Canon laser printer works fine with it).

[–] 18107@aussie.zone 16 points 4 days ago* (last edited 4 days ago) (2 children)

I bought a Brother laser printer (all in one). HomeAssistant immediately detected it and asked if I wanted to install the integration. All diagnostics were available immediately, and aside from some Wi-Fi issues (not the printer's fault), everything worked perfectly.

Unlike my old Cannon printer, I can print flawlessly from Linux and from my phone with no additional setup. I haven't tried aftermarket toner, but I see no reason that it wouldn't work.

My Brother printer has a local webpage for advanced settings. I used the webpage to add a shortcut to the printer screen so that family members can scan to the NAS with one button.

A Brother mono laser printer is probably the best value you'll get. I certainly didn't need an all in one color laser printer, but it's nice to have.

[–] JustEnoughDucks@feddit.nl 5 points 4 days ago

There have been some big changes at brother in the past couple of years. I am holding out hope that they don't enshittify and go the way of the others with firmware updates.

[–] early_riser@lemmy.world 3 points 4 days ago

Just quickly searching "Brother Printer" on Amazon and every listing has "Includes Refresh Subscription Trial" in the title.

[–] RheumatoidArthritis@mander.xyz 13 points 4 days ago* (last edited 4 days ago)

The standard Brother brick laser printer also reports toner level to HA (I never actually made use of that information)

[–] hateisreality@lemmy.world 1 points 3 days ago

I cannot recommend the Epson Eco Tank series enough. 8 years now and I've purchased one set of refill ink.

[–] sic_semper_tyrannis@lemmy.today 4 points 4 days ago (1 children)

Keep your eyes on this

https://www.crowdsupply.com/open-tools/open-printer

[–] early_riser@lemmy.world 3 points 4 days ago

While this is interesting it wouldn't work for my needs, mostly because I'm not the one using the printer most of the time. I need something that can print on heavy card stock.

[–] realitista@lemmus.org 3 points 4 days ago* (last edited 4 days ago) (1 children)

If you are just talking about monitoring ink levels, a lot of printers are supported I think. I use an Epson 3260 ink tank and it's been the best ink jet I've owned. Ink is fairly cheap, reports ink levels to HA, and clogs less than other ink tank printers I've owned, the wireless printing works well with iOS too.

[–] idunnololz@lemmy.world 2 points 3 days ago (1 children)

Similar model here and can vouch that they are pretty good. I picked up some spare ink for it from costco when it was on sale and I still have half of it after like 3 years.

[–] hateisreality@lemmy.world 3 points 3 days ago

8 years in and I am still working on emptying my first refil set.

[–] just_another_person@lemmy.world 3 points 4 days ago

Brother