3D Printing

4914 readers

2 users here now

For everyhting 3D printing related.

Please be excellent to each other :)

Icon by Freepik, Banner photo by Thiago Medeiros Araujo

founded 4 years ago

MODERATORS

3dnudel@lemmy.ml

Recommendations for a Plug-n-Play / Walk-Away 3D-Printer (lemmy.world)

submitted 3 days ago by dohpaz42@lemmy.world to c/3dprinting@lemmy.ml

7 comments fedilink hide all child comments

I have cut my teeth on the Ender 3 Pro v2 printer by Creality. Neat little printer; it works wonders when/if it’s perfectly dialed in. The thing is, I don’t have the interest to dial it in like it needs to be. I just want to turn it on, send it a print, and walk away. I do t want to spend all morning (like this morning) trying to “auto-level” 🙄 the bed, just to not have it be level.

When I try to manually level the bed it’s worse: I can measure one corner 5 times in a row, and get 5 wildly different heights each time. And I’m even using the Creality BL Touch sensor!

I have upgraded the springs, and I’m using the wide knob’s, and spent days trying to tune in my printer. I’m also using the Jyers Marlin firmware (15x15).

It’s exhausting and not fun. Help me Make Printing Fun Again. 😩

you are viewing a single comment's thread
view the rest of the comments

[–] fuckwit_mcbumcrumble@lemmy.dbzer0.com 2 points 3 days ago

I gave up entirely on my Ender 3 pro. No amount of tweaking could get it to print more or less flawlessly every time. There was always an issue that needed tweaking every time I fired it up. Everything I changed to make it better only made it worse.

But somehow my newer Ender 3 S1 pro has been mostly flawless. Calibration has taken a while, but its built in bed leveling actually works. You'll still need to do the initial leg work. But now that that's done I just periodically run the bed leveling and mostly just fire it up, start a print, and let it go. I'm never again going to touch a custom firmware.