homeassistant

16685 readers

32 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

How do I run power to a USB-C powered sensor? (lemmy.nz)

submitted 1 week ago* (last edited 1 week ago) by Dave@lemmy.nz to c/homeassistant@lemmy.world

25 comments fedilink hide all child comments

I'm just bought an Airgradient air quality sensor (actually two, an indoor and an outdoor).

I want to mount the outdoor one but it needs a USB-C power supply. I can run a cable but power isn't exactly close. Do I somehow find a 10m USB-C cable and run it through the roof to the sensor that I mount on the side of the house? What's a normal way of getting USB-C power to an area far away from the closest power point?

you are viewing a single comment's thread
view the rest of the comments

[–] Dave@lemmy.nz 2 points 1 week ago (1 children)

You can buy long USB C cables, just wondering if that's a good option. Someone else mentioned quite a drop in power delivery with a long cable so I'm thinking POE with a USB adapter might be the best option.

[–] KaninchenSpeed@lemmy.blahaj.zone 2 points 1 week ago

Voltage drop probably isn't a problem here, because your sensor draws verry little power. If you can get POE for cheap then thats a better option.