3DPrinting

18840 readers

29 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago

MODERATORS

andypiper@lemmy.world

j4k3@lemmy.world

GrayBackgroundMusic@lemmy.zip

3D printing with unconventional vase mode (vorpal.se)

submitted 1 week ago by Vorpal@programming.dev to c/3dprinting@lemmy.world

4 comments fedilink hide all child comments

Because I couldn't find a good non-video resource on this topic, I wrote a tutorial on how to print non-vases in vase mode.

The idea comes from 3D printing wings for model aircrafts, but it can be applied outside this area as well in order to minimise time and material usage in a part (at the expense of more CAD time).

Hope it is useful to someone and I look forward to any feedback on how to improve the article (or correct any mistakes).

top 4 comments

sorted by: hot top controversial new old

[–] Toady@fedia.io 7 points 1 week ago (1 children)

This technique is great for tpu I recommend trying it out

[–] Vorpal@programming.dev 4 points 1 week ago* (last edited 1 week ago)

Thanks, didn't think about that. Two reasons I can think of:

Vase mode should reduce stringing on TPU as it avoids retractions. Though I have found that just drying TPU + enabling "avoid crossing perimeters" usually hides most stringing.
Additionally, it would let you have more precise control over how squishy/firm the TPU part is by adjusting the number of perimeters. Though you can use modifier volumes in the slicer to adjust infill and number of perimeters locally in a part.

Is there any other reason why this is good for TPU that I missed?

[–] synapse1278@lemmy.world 4 points 1 week ago

Very nice write up ! A little while ago I used the double wall trick on a design: https://www.printables.com/model/1202258-lamp-cannele-design-vase-mode-bed-side-lamp

[–] Blue_Morpho@lemmy.world 3 points 1 week ago

Fantastic info! Thanks for sharing.