A community about dogs.
Breeds, tips and tricks about training and behaviour, news affecting dog owners, canine photography, dog-related art and any questions related to dog ownership.
For what it’s worth, this would be intentional. They would have had to buy a blank door panel and make the lockset holes and hinge gains themselves. The handle holes aren’t center in the door, and the hinges aren’t equidistance either.
So not an idiot, and at least a little handy if they didn’t just pay someone to intentionally do this as well. Most people would just buy prehung doors, especially the front.
My first gig was construction. The foreman and another guy were talking about how pre-hung doors were the best thing ever made.When I asked them why they believed this they worked with me to hang a door. Fuck that, pre-hung doors are like the 4th greatest creation of the 20th century.
I've hung exactly one door from scratch myself. In the time it took me to do that, I could have put up 8 prehung doors.
That's not even a little bit of an exaggeration.
The only catch is that door we made is the only door that 35 years later has no gaps and closes and opens perfectly according to the current owner (grandson of the og owner).
That makes sense, yeah. The one I had to do was for a frame that was basically built into a house that was made at some point in the 1950's so there wasn't any choice but to cut it and chisel it all out and measure and align everything manually...
It did open and close pretty nice though.
I literally just replaced all the interior doors in my house myself, its not hard if you use a jig, two routers, a faceplate jig, strike plate jig, impact driver, two drill drivers with one hooked up to a portable drill press and the other with an augur, another drill driver with the hinge pilot hole gadgets, saw stands, door stand, track saw, and air bags to lift the doors. Oh, ohhh
Except firedoors, fuck those overweight mother fuckers and their stupid hidden self shutting chains
I had to do one with just hand tools. No power tools allowed on site, and dragging the door inside outside was a 15 minute ordeal each way. And had to do the frame by hand anyways…
So hand cranked hand auger for the lockset, and a chisel and hammer for the hinge gains. Took me a whole damn day to do that one door.
Yeah there is good reason to my madness when it comes to the number of tools I used, no faffing about changing bits or resetting jigs or manual measuring. I would reckon about an hour a door from unpacking it to having it fully trimmed and hung. Would have been a bit quicker but I went with magnetic latches so they needed a 80mm back box and my 1/2 router only does 70mm deep so I had to use the drill press with a Forstner to get the remaining 10mm clearance needed.
I have done doors by hand, thats about 3 to 4 hours for me if I do not have to make a proper square backbox and I can get away with a round one via an auger. I do not like the bite of an auger if the backbox depth is even remotely close to the edge of the frame for the door due to the bite you get dragging you in further than you intended even when turning by hand. I much prefer a Forstner, but I will be fucked if I am going to hand crank one of those into oak.
Its decidedly longer if my chisels aren't sharp, having to hand sharpen them is a PITA when its more than once a day, I wish I had the space for a wheel to speed that up. Other dream thing is a 360 degree door vise that holds the entire door and lets you spin it 360 degrees without having to take it off your stands and hand rotate it. Would make switching from hinges to mortise to handles a breeze.
I worked as a Carpenter for a GC (employed, not contractor), so it was always a fine line between keeping us busy and being efficient by using the right specializations. Yeah I can do some drywall taping and mudding, but god if we aren’t busy, please sub that crap out, it’ll look better anyways. But I’ll also take the 3 days of pay instead.
Plastering I will only ever do for myself, and then only to save money as I am too tight to pay someone else to do it, much the same reason I do tiling or plumbing. They are one of those jobs like fine carpentry that is always better done by an expert with the years of just doing that.
Plasterboard layup often gets left to the builder in the UK, assuming they can actually level it properly.
You mean lath and plaster? They still use that? I mean installing drywall panels and taping the joints and skim coating. But yeah plastering is more like concrete finishing, an art, and definitely left to the professionals.
Would rather place and finish concrete over mudding and taping though, better on my hands.
When I was a kid, my dad had a friend who had been a carpenter, and retired, but he would still hang doors. He said the amount of money he could charge for that made it worth doing them.
No doubt, if your home is older you need a door guy to fix problems. In my modular shitbox you can just rehang a new prehung door.
When did prehung doors become a thing? This was in the 70s
1956 is the patent but loving in the Northeast USA most houses were older than that.
I suppose it doesn't matter much in the US where those are more rare, but in the rest of the world where there are a lot of old buildings where absolutely nothing is straight in any direction whatsoever, installing a door or window properly is a major endeavour if you want it to be properly balanced. Hanging the door on is a minor part of the whole affair.
What the heck is up with that door handle anyway?
Looks like a keg tap handle….
Would have been a lot less effort to install a normal door normally, then install a window in the bottom of it.
I dont know, I know how to install doors, I dont know fuck all about windows. This is how I would have done it lol.
The idiot should have just gotten upside down dogs.
What’s updog?
Not much
a idiot
the whole part after the comma is fucked. No capitalized I, what you said and then no punctuation at the end. It's like they were trying to make it ironic.
Pretty cool, though I think that would just encourage my dog to bark and get worked up any time someone walks by
Mine does that even without being able to see outside. They just sense a presence and lose their shit.
they'd get used to it and eventually respond the same as when it wasn't there. source: got a big metal screen door so i can leave the main door open and get a good breeze
Sure, that is what I would say too if I did that.
You put your house upside down
The two are not mutually exclusive.
...or you could install a screen door, leave it closed but open the wood door...
Some people live in areas with inclement weather.
Thanks for reminding me of that word
8D
Seems like someone could easily kick the closest window to the handle and reach up
There are easier ways in.
yeah if you're breaking a window to get in may as well break an actual window
In here our doors open to outside, so you can't kick them in and as weather goes below -30C in the winter they're pretty sturdy for insulation. Also nearly every door has some kind of abloy-lock which is practically pick-proof and hinges have safety pins so you can't pull the door out that way (again, that's more to do with insulation and weight management than safety). And commonly right next to the door is a nice window to let daylight in.
Now I can kick that part in and crawl through
I wonder if there are vertically symmetrical doors designed for pet owners
The standard move is a glass storm door.