3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
I tried 3d print glue stick. washing with alcohol. wash the nozzle, cold pull, higher bed temperature... nothing,
the i has 3 successful prints with the same file, and now for the life of me I can't get it to work
I had similar issues not too long ago and washing the plate with soap and warm water did the trick. .Made sure it dried for a day too just in case.
THIS!!!!! THIS IS WHAT WORKED
ANYONE IN THE FUTURE WITH THE SAME PROBLEM CHECK THAT
Heyoooo, glad I could help!
A few things I might consider/think to try:
I don't have a Bambu, but these are a few of the things I've learned with my Monoprice Maker Select v2 and Ankermake M5.
Skip the glue. I’ve found it’s just gunk that separates the filament from the print bed, worsening adhesion in my testing. Clean your print bed with rubbing alcohol before hand.
99% of printing issues with PLA are solved with a thin film of glue stick.
IPA does not remove oils, it solubilizes them and then they deposit back down again when it evaporates. Soap and water is better because it removes oils and plasticizers.
IPA does not remove oils, it solubilizes them and then they deposit back down again when it evaporates.
You don't dump alcohol on the plate and then let it evaporate. You put it on a paper towel or microfiber cloth and rub the plate so the oils are transferred to the paper towel.
Dish soap can be problematic because many brands include oils to be soft on hands. Palmolive is named because it has Palm oil in it. Dawn has Palm oil too
(it was solved by washing the plate with soap)
The PLA is a week old, but it was 10$ no brand PLA which might be an issue.
there nozzle might be about a year old,
I'm using 60°, but tried 70°
thanks for your answer