hedgehog

I’m a millennial and I did it more than once on hardware older than I was, but because I wanted to, not because there were no other options.

There have been so many places in front end web dev that used the abbreviation “a11y” without defining it (or explaining the 11) that for years I assumed it was just the name of a particular library that had gotten Kleenexed.

(To be clear, I’m using “Kleenexed” as a verb here to mean “genericized explosively, as if a sneeze.”)

It didn’t help to look at the code, either. “Okay cool, so all this does is add a bunch of random extra tags to the DOM? Doesn’t seem super useful but okay, I guess there’s probably some tool out there that depends on them but we probably don’t use it.”

Illegal vote suppression elected Trump, but even if it hadn’t, you should blame Democrats before blaming people who voted for third party candidates. Now, if you’re talking about people who “protest voted” by voting for Trump (in both the primaries and the election), then sure. Those people did, in fact, play an instrumental part in electing him.

Why blame Democrats? Well, beyond just kinda being Republican-lites:

• for opposing ranked choice voting (and alternatives)
• for not rallying around progressive candidates
• for not choosing Kamala via primary elections in 2024

Democrats are the bare minimum “harm reduction” party, and I don’t bare any ill will toward people who voted for them rather than a party that would actually try to effect change, but the opposite mindset - blaming third party voters for not voting for Democrats - is very shortsighted. And as third party voters have never had the power to enact RCV or STAR voting or otherwise improve the system, blaming them instead of the Democrats who have had that power is inane.

I’ve voted for a Democrat every single presidential election that I’ve been able to, but I honestly wish I hadn’t. I’d much rather there be more visibility for third parties, and for more people to feel empowered to vote for third party candidates.

I don’t use my Windows 10 desktop a ton, but I’ve definitely gotten the full page “Update to Windows 11” screen a few times, and it has Windows 10 Pro installed.

Sure, just be aware that unripe tomatoes (not just the stems) are also toxic to cats.

You can’t just consider the cheese! You gotta look up all the ingredients!

• https://www.cancateat.food/food/bread
• https://www.cancateat.food/food/lettuce
• https://www.cancateat.food/food/tomato
• https://www.cancateat.food/food/mayonnaise
• https://www.cancateat.food/food/beef
• https://www.cancateat.food/food/cheese

Consensus: hold the tomato! Otherwise, if there’s no seasoning, everything else is acceptable in small amounts.

I’m lucky enough to be able to budget for things I want. If it’s in the budget, no justification is required. If it’s in the budget but expensive, then I just have to figure out if I want it more than the other things I want (or will want) that I won’t be able to afford as a result.

I hate how much I agree with you in principle and how ugly it looks in practice. With doubled periods, at least - different marks don’t trigger that same reaction. For example, a question mark inside, followed by a period or comma outside feels right.

It’s not grammatically incorrect to end a sentence with a preposition. It’s a common misconception that it is a rule, basically because one guy argued in favor of it back in the 1600s and had some support for formal writing in the 1700s. But it’s never been a broad rule, and even in formal contexts it’s not a rule in any current, reputable style or usage guides (so far as I know, at least).

Some more info on the topic: https://www.merriam-webster.com/grammar/prepositions-ending-a-sentence-with

Glaring doesn't imply a negative meaning. In this case it's used to mean "obvious".

Unless you’re suggesting that “glaring” means “obviously staring” (it doesn’t - that would be “glaringly staring”) this doesn’t make any sense.

“[He’s] glaring at [direct object]” is an example of a sentence that uses the present participle form of the verb “glare,” which explicitly communicates anger or fierceness.

If you’re not convinced, read on.

—————

The verb form that takes an object is:

Glare (verb with object): to express with a glare. They glared their anger at each other

The noun form the above definition references is:

Glare (noun): a fiercely or angrily piercing stare.

“Glaring” can be an adjective and one of those definitions does mean “obvious” or “conspicuous,” but the use of that form of the word doesn’t make sense in her sentence. Think about a comparable sentence like “The undercover operative is conspicuous at the bar,” where the bar is the location. (Even then, most people wouldn’t use “glaring” in that sentence, as “conspicuous” or “obvious” are much less ambiguous; the operative could be staring piercingly or angrily at the bar rather than being glaring while being at the bar.) Another example that makes a bit more sense is “The effect of the invasive plants is glaring at the park.”

But for that interpretation to be valid here, you’d have to:

• believe that the dude is trying to hide/blend in, or otherwise explain how he - not what he’s doing, but the dude himself - is conspicuous
• believe that the woman’s referring to her own ass as a location
• assume that she isn’t commenting on how the guy is looking at her ass, even though the joke depends on giving him something different to look at

That’s a bit of a stretch.

This is what I would try first. It looks like 1337 is the exposed port, per https://github.com/nightscout/cgm-remote-monitor/blob/master/Dockerfile

x-logging:
  &default-logging
  options:
    max-size: '10m'
    max-file: '5'
  driver: json-file

services:
  mongo:
    image: mongo:4.4
    volumes:
      - ${NS_MONGO_DATA_DIR:-./mongo-data}:/data/db:cached
    logging: *default-logging

  nightscout:
    image: nightscout/cgm-remote-monitor:latest
    container_name: nightscout
    restart: always
    depends_on:
      - mongo
    logging: *default-logging
    ports:
      - 1337:1337
    environment:
      ### Variables for the container
      NODE_ENV: production
      TZ: [removed]

      ### Overridden variables for Docker Compose setup
      # The `nightscout` service can use HTTP, because we use `nginx` to serve the HTTPS
      # and manage TLS certificates
      INSECURE_USE_HTTP: 'true'

      # For all other settings, please refer to the Environment section of the README
      ### Required variables
      # MONGO_CONNECTION - The connection string for your Mongo database.
      # Something like mongodb://sally:sallypass@ds099999.mongolab.com:99999/nightscout
      # The default connects to the `mongo` included in this docker-compose file.
      # If you change it, you probably also want to comment out the entire `mongo` service block
      # and `depends_on` block above.
      MONGO_CONNECTION: mongodb://mongo:27017/nightscout

      # API_SECRET - A secret passphrase that must be at least 12 characters long.
      API_SECRET: [removed]

      ### Features
      # ENABLE - Used to enable optional features, expects a space delimited list, such as: careportal rawbg iob
      # See https://github.com/nightscout/cgm-remote-monitor#plugins for details
      ENABLE: careportal rawbg iob

      # AUTH_DEFAULT_ROLES (readable) - possible values readable, denied, or any valid role name.
      # When readable, anyone can view Nightscout without a token. Setting it to denied will require
      # a token from every visit, using status-only will enable api-secret based login.
      AUTH_DEFAULT_ROLES: denied

      # For all other settings, please refer to the Environment section of the README
      # https://github.com/nightscout/cgm-remote-monitor#environment

To run it with Nginx instead of Traefik, you need to figure out what port Nightscout’s web server runs on, then expose that port, e.g.,

services:
  nightscout:
    ports:
      - 3000:3000

You can remove the labels as those are used by Traefik, as well as the Traefik service itself.

Then just point Nginx to that port (e.g., 3000) on your local machine.

—-

Traefik has to know the port, too, but it will auto detect the port that a local Docker service is running on. It looks like your config is relying on that feature as I don’t see the label that explicitly specifies the port.