this post was submitted on 11 Apr 2025
1090 points (99.0% liked)
Microblog Memes
7362 readers
1831 users here now
A place to share screenshots of Microblog posts, whether from Mastodon, tumblr, ~~Twitter~~ X, KBin, Threads or elsewhere.
Created as an evolution of White People Twitter and other tweet-capture subreddits.
Rules:
- Please put at least one word relevant to the post in the post title.
- Be nice.
- No advertising, brand promotion or guerilla marketing.
- Posters are encouraged to link to the toot or tweet etc in the description of posts.
Related communities:
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
You probably don't need a full renovation to replace a showerhead. I'm not good at much, but am vaguely competent with basic plumbing. Post a photo of the shower. Most likely you just need a wrench, a new shower-head, and some nylon tape. If you want to get fancy, they also make extenders so you can add extra showerheads without a renovation.
It's definitely not going to be that easy.
Let me describe what was there when we moved in.... So, the bathroom has a fairly typical tub, for the purposes of this explanation, we won't go into things that aren't directly relevant.... So for now, it's fairly typical. However, there's no hot/cold controls on the wall, there's a faucet on the corner of the tub basin, with a lever that acts as the diverter, two knobs for hot and cold and there's, what looks like a grab bar, but it actually is a specialty pipe for the existing wand, that actually has a mount for the wand so the shower can be used normally.
Well, without going into too much detail, I'm fairly certain that at least one person cranked on the diverter too hard (no idea why) and basically turned the insides into sand. So now there is a leak that's dripping into the lower levels creating water damage. We shut off the water. Called a plumber.
Thousands of dollars later, our replacement faucet/diverter is odd to say the least: there is no diverter. There's actually two water controls, one for the wand, one for the tub faucet. You control both independently. The wand, no longer has a place to mount, when not in use the flex hose for it retracts into the side of the tub, leaving the head of the wand sticking out of the surface.
For the shower itself, we have zero of the usual trimmings. There's no cutout in the wall for a diverter, there's no threaded pipe coming out of the wall above your head for a shower head. There's almost none of what you would expect.
What I expect, on order to unfuck this situation, is that we'll have to tear out the part of the wall where the diverter and temp controls should be, install a standard diverter box, run a line from there, up the wall to put in a standard fitting for a shower head, then do all of the plumbing to make it all go, which will require copper pipe soldering, something I'm not qualified to do.
Trust me when I say: if it were as easy as you originally thought it was, then this would not be an issue for me, and it would have been completed long ago.
I appreciate that you're trying to be helpful here. Thanks for that, but unfortunately I think this is over both of our heads as amateurs. As far as I'm concerned, half the shower needs to be pulled apart to fix this monstrosity.