Older machines running Xfce brings me joy.
this post was submitted on 15 Jun 2025
349 points (97.5% liked)
Linux
55319 readers
1258 users here now
From Wikipedia, the free encyclopedia
Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).
Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.
Rules
- Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
- No misinformation
- No NSFW content
- No hate speech, bigotry, etc
Related Communities
Community icon by AlpΓ‘r-Etele MΓ©der, licensed under CC BY 3.0
founded 6 years ago
MODERATORS
I had slackware on my 386DX 40. 4mb ram. It was kinda short-lived. I never got my modem working. I got a book, paged thought it. Learning shit was hard in the 90's Internet.
Up 'til 2022 or 2023 company I work for used Pentium 4 at POS PCs running ancient openSUSE. They would be still in service if it weren't for leaking/swollen caps on most motherboards. Pure power wasn't really there, but it was plenty enough to run that checkout software...
Yes the laptop CPU and RAM may be upgradeable but have you considered the parts availability? Considering its a 32bit CPU
Yeah, that's what I'm researching right now.. I hope I can at least make it useable enough for web browsing
Iβm pretty certain the first computer I installed Linux on was a Pentium 75 with 4MB of RAM. I know I ran it on some 486s booting off floppys at work. We were at 10,000 feet and couldnβt trust the lifespan of spinning rust.
Hell yeah! Love seeing old hardware like this still running a modern OS.
With Linux, if your hardware is a decade old, you've barely even reached middle-age.
Meanwhile Windows 11 won't even allow an official install on hardware that's 4-5 years old.
Long live Linux & FOSS β
https://shop.hak5.org/products/shark-jack technically runs openwrt.
SoC: 580MHz MediaTek MT7628 mips CPU
Memory: 64 MB DDR2 RAM, 64 MB SPI Flash
2GB of RAM? Low?
Were you born after the year 2000?
Haha, I've been used to 4gb ram minimum for most of my life π
Lmao, I've ran Linux on an eeePC with 1GB RAM and 900MHz Intel Atom. Compiling gcc & glibc could take hours.
Edit: RPi3 still got only 1GB, BeagleBone Black even got 512MB, don't forget RPi0
I remember when 128MB RAM sticks were $400
I remember expanding my Amiga with 512KB to 1MB Fast RAM and later going crazy with another two megabyte Slow RAM.
load more comments
(8 replies)
load more comments
(2 replies)
Nice
thats my current laptop
Edit: im exagerating but I really have 20-yr 32-bit Dell laptops running minimal debian linux. and my current laptop is 10+ yrs old Lenovo which I already replaced its screen, rams, keyboard, bluetooth, usb ports... and it's still working flawlessly for daily tasks, video/music editing, coding and programming, internet browsing :D
I think my lowest was a 33 MHz 486sx (maybe DX) with 8MB of RAM.
I wouldn't want to try it today though.
The first machine I ran Linux on was a 486DX 33MHz too. I think it had 8 MB (or some weird thing like 4 MB originally and randomly stuck 8 MB addition? I don't remember anymore.)
load more comments
(5 replies)
load more comments
(4 replies)
I booted Buildroot with kernel 5.17 on a Pentium II laptop off a CD I burned once - I needed to dump a drive once and that was the only hardware I had on hand that could dump 2.5β IDE drives and had a working CD drive so I could boot something other than the operating system installed on the drive.
Are you using systemd? Because 317 MB of RAM is really low for a normal Debian installation with XFce. At my mom's 2 GB ram laptop, it uses 850 MB on a cold boot.
It is because it is 32 bit. You can run a 32 bit distro on your machine too if you really want.
You can get a full Trinity desktop on Q4OS in 130 MB of RAM (32 bit edition).
I don't think the difference between 32bit and 64bit is 2x in memory sizes, it's way less than that. I run Q4OS, it runs at 350 MBs here.
Are you running Trinity or KDE?
Not sure why I get so much less unless it is that. Or are you saying you run Trinity 64 bit?
I agree that 32 bit is not often going to be 50% less in practice. Sometimes I think we should be running 64 bit kernels with 32 bit userland.
Trinity of course. That's the point of low end computing with Q4OS. :)
I rushed to the comments when I saw a 1.6ghz CPU being called low end but I see OPs already been dealt with. I remember the first ever 1ghz CPU being an overclocked nitrogen cooled AMD Athlon. Me and my mates were all talking about it when it happened.
load more comments
(4 replies)
Those are better specs than what I used throughout college (an Asus Eee PC running Debian with Xfce and Openbox). Not a powerful machine, but I absolutely loved that thing.
I run a rpi zero w first gen
I ran it on an original Raspberry Pi B which has the same RAM and a slower CPU than the original Zero! It was still in use as a Pi-hole (running the DietPi OS) until recently where it seems to be dying or not keeping up.
Thanks for suggesting DietPi! I never heard of it but it sounds just like what my ZeroW needs
(Also runs PiHole)
No problem! I've used it for years, though my home assistant running on a Raspberry Pi 4 is now doing the pi-hole thing with adguard instead as the original one was having issues. Though you get weird DNS quirks when the machine running DNS also relies on the internet.
Plus that time I did a dumb thing in home assistant to see what would happen, and it brought the internet down.
So I am keen to get another Pi. I highly recommend keeping it on a dedicated device you never touch except for updates!
2 gigs of ram ? You probably can have an emulation station up to PS1 with this hardware.
load more comments
(2 replies)
Are we competing again?
I'm proud to be setting up a rhel10 desktop, as it'll be the first time I ran Linux as a desktop in 30 years of a Linux/Unix career.
To rephrase: I ran XFree86 on a 4mb i386 machine 30 years ago.
What do I win?
load more comments
(1 replies)
Is this one of those old obscenely small obscenely underpowered net books?
This one is actually obscenely underpowered but obscenely large laptop
I got you beat with my HP Mini running a 32-bit Intel Atom N270 that I use to develop games for the open source physiotherapy gamification device I made for my kid when I'm on the train.
Don't want to carry my full-size gaming laptop to work just to do some light lua coding.
If Minix counts, I got it running on a 286 some years ago. I don't remember how much RAM it had, but it was very little.
Whilst the Celeron was indeed utter cack, 2 GB has me making four Yorkshiremen-style "2GB? Luxury!" style comments.
I used to run Ubuntu on my Acer Aspire 1362 WMLi back in 2005. I had 512 MB of RAM and a 2800+ Sempron processor.
That said, looking at this:
https://www.cpubenchmark.net/compare/1351vs710/Mobile-AMD-Sempron-2800+-vs-Intel-Celeron-M-1.60GHz
My old Sempron was a better CPU than that piece of junk Celeron you've got there. Giving it 2GB of RAM is hilarious!
load more comments
(4 replies)
I've run Linux on a 166MHz Pentium with 64MB of RAM. There's not much modern software that will run on that hardware though.
load more comments
(1 replies)
amazing, well done! i run Debian on cheap used Thinkcentre PCs, run as k3s worker nodes just fine.
May I ask what are the specs and size of those Thinkcentres? I have one I'm using as a server and planning to upgrade the CPU because it has a dual core one, and someone offered me the same one I have, but it's pretty big. I'd prefer to use the tiny models when I can buy some :D
Lenovo ThinkCentre M715q, Lenovo ThinkCentre M93p
separate cheap newer N100 cpu node for jellyfin, other encoding
Intel NUC NUC8i5BEHS for k3s control plane, little more expensive but reliable.
i usually replace Thinkcentre fans w noctua for power draw, performance, and noise. and remove wifi module, not needed, draws power, closed blob firmware, is a risk. pops out easy, no config changes needed in Debian.
Thank you! That's really helpful for the plans I have :)
load more comments
(1 replies)
view more: next βΊ